How to Fix Xfinity Voice Control Remote Not, Working

Xfinity is among the top remote controls that allow you to access everything and everything you’d like using voice commands. Unfortunately, many are who are having issues using Xfinity Voice Remote. Do you happen to be experiencing problems regarding the Xfinity Voice Remote? If so, then you’re in the right spot.

This is a comprehensive guide on troubleshooting your voice controller and solving the problem! So, therefore, without further delay, we’ll get going with the process.

There is a myriad of causes that could cause you to have your Xfinity remote not functioning correctly. Look over the suggestions below and find out what can help you resolve the issue with your device.

Jio Network Down: Fix the ‘Not Registered on Network Issue in 2022?

1. Check The Battery

Make sure to check the battery of your Xfinity Remote to see if it has enough battery. It can fail in a storm that is not fully charged. To test the battery levels on your Xfinity Voice remote, long-press the “Setup” button until it blinks on the remote and changes from green to red. Then, check the battery’s status from the bar count and determine if it’s fully charged.

If the LED’s color doesn’t change from red to green, this means that your remote has run out of battery. Therefore, you should put it back on charge and see whether the issue has been resolved.

2. Re-Pair the Remote to Your T.V

Connect the Xfinity Voice Remote from your TV Box and pair it up again. Then, follow the steps below to pair the device again.

Long hold on to the Xfinity and Info buttons for 5 seconds until you see the Voice Remote light change from green to red.

Enter the 3-digit pairing code onto your display to successfully pair the Remote.
Once you have done that, your Xfinity Voice Remote is paired with the TV Box!

How to fix Spotify Friend Activity That Isn’t working in 2022?

3. Reset Voice Remote

If your Voice remote has problems and isn’t functioning, try to reboot the Remote. Hold and press”Set Up” or the “Set to” button till the LED changes from Red to Green. After that, press 9 > 8 > 1. Now, the LED will flash twice in Green color. This means the Xfinity Voice Remote is reset successfully. Connect the remote to your device once more and check if it assists you in fixing the issue.

4. Hard Reboot

Remove your remote from your TV, turn the device you’re using off, wait 5-10 seconds, then turn it on. This will eliminate all tiny bugs and will help you resolve the issue.

Leave a Reply

Your email address will not be published. Required fields are marked *